Regulatory Information
This section provides regulatory information for the following Ubisense devices:
-
2.4 GHz Receivers (discontinued)
Any changes or modifications made to a device which are not expressly approved by Ubisense Limited could void the user's authority to operate the equipment.
UWB Sensors (Ubisensor30v1)
To improve readability, the name Ubisensor is used instead of Ubisensor30v1 in the remainder of this section.
Regulatory Information for the United States of America
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Users should also carefully note the following information.
Any changes or modifications made to the device, which are not expressly approved by Ubisense Limited could void the user's authority to operate the equipment.
Regulatory Information for Canada
This device is approved under Industry Canada documents RSS-GEN and RSS-210.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence (s). Son utilisation est soumise aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif.
This Class B digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada, ICES-3 (B)/NMB-3(B).
Any changes or modifications made to the device, which are not expressly approved by Ubisense Limited could void the user's authority to operate the equipment.
Regulatory Information for Europe
Hereby, Ubisense declares that this Ubisensor is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity for this equipment may be obtained from:
Ubisense
St. Andrew's House
St. Andrews Road
Chesterton
Cambridge
CB4 1DL
United Kingdom
2.4 GHz Receivers (UBIPRES24)
2.4 GHz Receivers are no longer supplied by Ubisense. This section has been retained for legacy installations.
Regulatory Information for the United States of America
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Users should also carefully note the following information.
Any changes or modifications made to the device, which are not expressly approved by Ubisense Limited could void the user's authority to operate the equipment.
Regulatory Information for Canada
This 2.4 GHz Receiver conforms to Industry Canada standard RSS-GEN.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence (s). Son utilisation est soumise aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif.
This Class B digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada, ICES-3 (B)/NMB-3(B).
Regulatory Information for Europe
Hereby, Ubisense declares that this 2.4 GHz Receiver is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity for this equipment may be obtained from:
Ubisense
St. Andrew's House
St. Andrews Road
Chesterton
Cambridge
CB4 1DL
United Kingdom
Timing Distribution Unit
FCC Requirements for Device Operation
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by Ubisense could void the authority to operate equipment.
Regulatory Information for Canada
This Class A digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Regulatory Information for Europe
Hereby, Ubisense declares that this Timing Distribution Unit is in compliance with the essential requirements and other relevant provisions of Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. A copy of the Declaration of Conformity for this equipment may be obtained from:
Ubisense
St. Andrew's House
St. Andrews Road
Chesterton
Cambridge
CB4 1DL
United Kingdom
Industrial Tags and Tool Tags
The terms 'Ubisense tag' and 'tag' are used generically in this section to refer to Industrial Tags and Tool Tags.
Regulatory Information for United States of America
The Ubisense tag is a wideband wireless device certified under FCC Part 15.250. Its use is subject to technical requirements for wideband systems. Users should note carefully the following information:
- Operation on board an aircraft or a satellite is prohibited.
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Users should also carefully note the following information:
Any changes or modifications made to the device, which are not expressly approved by Ubisense Limited could void the user's authority to operate the equipment.
Regulatory Information for Canada
This Ubisense tag is approved under Industry Canada documents RSS-GEN, RSS-210 and RSS-220.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence (s). Son utilisation est soumise aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif.
This Class B digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada, ICES-3 (B)/NMB-3(B).
CAUTION: Any changes or modifications made to the device which are not expressly approved by Ubisense Limited could void the user's authority to operate the equipment. This device must only be used indoors.
Regulatory Information for Europe
Hereby, Ubisense declares that this Ubisense tag is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity for this equipment may be obtained from:
Ubisense
St. Andrew's House
St. Andrews Road
Chesterton
Cambridge
CB4 1DL, United Kingdom
This UWB transmitter must not be installed at a fixed outdoor location or used in flying models, aircraft and other forms of aviation.
Multi-mode Tags
Regulatory Information for United States of America
This Ubisense tag is a wideband wireless device certified under FCC Part 15.250. Its use is subject to technical requirements for wideband systems. Users should note carefully the following information:
- Operation on board an aircraft or a satellite is prohibited.
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Users should also carefully note the following information.
Regulatory Information for Europe
Hereby, Ubisense declares that this Ubisense tag is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity for this equipment may be obtained from:
Ubisense
St. Andrew's House
St. Andrews Road
Chesterton
Cambridge
CB4 1DL
United Kingdom
This UWB transmitter must not be installed at a fixed outdoor location or used in flying models, aircraft and other forms of aviation.
Mini Tags (D4FLAT33)
Regulatory Information for the United States of America
Contains FCC ID: SEAMOD31
NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Users should carefully note the following information:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Regulatory Information for Europe
Hereby, Ubisense declares that this Mini Tag is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU. A copy of the Declaration of Conformity for this equipment may be obtained from:
Ubisense
St. Andrew's House
St. Andrews Road
Chesterton
Cambridge
CB4 1DL
United Kingdom
This UWB transmitter must not be installed at a fixed outdoor location or used in flying models, aircraft and other forms of aviation.
As per ECC/DEC/(06)04 [1] the operation of UWB transmitters is not permitted:
• Aboard an aircraft
• Aboard a ship
• At a fixed outdoor location
Regulatory Information for Canada
Contains IC: 8673A – MOD31
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Tag Modules
Regulatory Information for the United States of America
The Modular Ubitag V3.0 is approved under Parts 15.249 and 15.250 of the FCC rules as a Modular Transmitter.
The product into which the Modular Ubitag V3.0 is incorporated must bear a label per the FCC requirements which shows the FCC ID assigned to the Modular Ubitag V3.0 as follows.
Contains FCC ID: SEAMOD30
The following information must be conveyed in the information supplied to the End User of the product into which the Modular Ubitag V3.0 is incorporated:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The user’s manual or instruction manual shall caution the user that changes or modifications to the equipment not expressly approved by the party responsible for the grant of equipment authorization issued by the FCC could void the user’s authority to operate the equipment under the grant of equipment authorization, for example:
Any changes or modifications made to the Modular Ubitag V3.0 which are not expressly approved by Ubisense Limited could void the user's authority to operate the equipment.
Regulatory Information for Canada
The Modular Ubitag V3.0 is approved under Industry Canada documents RSS-GEN, RSS-210 and RSS-220 as a Modular Transmitter.
In order to meet the RF exposure requirements of RSS-102 (general exposure conditions) products into which the Modular Ubitag V3.0 is incorporated should be designed such that a user/bystander should be no closer than 5 mm to the antenna of the module.
The product into which the Modular Ubitag V3.0 is incorporated must bear a label per Industry Canada requirements which shows the Industry Canada ID assigned to the Modular Ubitag V3.0 as follows.
Contains IC: 8673A-MOD30
The following information must be conveyed in the information supplied to the End User of the product into which the Modular Ubitag V3.0 is incorporated:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence (s). Son utilisation est soumise aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif.
Regulatory Information for Europe
Hereby, Ubisense declares that this Ubisense tag is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity for this equipment may be obtained from:
Ubisense
St. Andrew's House
St. Andrews Road
Chesterton
Cambridge
CB4 1DL
United Kingdom
This UWB transmitter must not be installed at a fixed outdoor location or used in flying models, aircraft and other forms of aviation.